Selective Pallet Rack Systems


Selective Pallet Racking Systems

Russell Industries will buy new or used pallet rack systems including all that are mentioned in this aritcle. Please contact us at 877-718-7225 for more information so we can install or fabircate these pallet rack systems for your warehouse.

Selective Pallet Racking is the most common pallet racking system in use today. There are two types of Selective pallet racking: Roll Formed, or clip-in configuration, and a Structural bolt-together configuration.



  1. Roll formed selective rack is most commonly manufactured in a "teardrop" style (so named as the holes on the column of the upright are shaped like a teardrop). Pallets then rest on the horizontal load beams that are held in place by mounting clips. Because the clips on teardrop configurations can be quickly moved, the shelves can be easily adjusted to different heights to accommodate various load sizes. This is convenient for a warehouse that needs to store a wide variety of product sizes.
  2. Structural pallet rack systems are very similar to roll formed pallet rack systems except the horizontal load beams are attached to the uprights with bolts and have much greater weight-bearing capacity. The bolt fixings make this a form of adjustable shelving - racks can be constructed, reconfigured, and dismantled and reused as necessary.


Structural pallet racking can be designed into the structure of the building itself, so that the upright columns are simultaneously used to support the roof of the storage facility, in which case the structural pallet rack uprights replace the storage building's vertical support I-beams. This system is a rack supported building.

Selective pallet rack systems provide easy accessibility to all products at all times - important if the inventory is rapidly depleted and restocked (called quick turnover). A selective pallet rack system is commonly used in a "big-box" distribution application, as well as in retail store inventory rooms, cold storage applications, wholesale stores, etc.

Common components of selective rack include the following:



  1. Load beams also referred to as step beams or box beams.
    • Most step beams are roll formed members with a 1? step along the top inside edge. This step is used to hold any load support components such as pallet supports or wire decks.
    • Box beams have no inset step, instead have four flat sides like a box. All load beams typically mount onto an upright frame column with integral rivets or hooks. Some systems utilize an extra clip or bolt to lock the beam to the upright.
    • Structural beams are hot formed structural C shapes with connecting clips at either end. Structural load beams are generally used with structural uprights but can be used with standard roll formed uprights. Structural load beams offer heavier weight capacities than step beams or box beams.

  2. Upright frames (also called upright columns or uprights) vary in size and design depending on load requirements, and styles. The most common upright column is produced by roll forming flat coil stock steel into a modified "C" shape with returns. This style is often referred to as open-back roll-formed columns. Holes or slots are punched during manufacturing up and down the column at standard intervals so that the load beams can be mounted into the upright columns. Upright frames can also be constructed utilizing structural C shapes for columns. Structural uprights have an increased weight capacity over roll formed uprights.
  3. Horizontal and Diagonal braces, or upright frame lacing is usually welded between two upright columns to form selective upright frames. The lacing may be bolted to the columns in some cases.
  4. Pallet supports are roll formed channels that are placed front to back between the load beams used to support pallets.
  5. Wire decking is commonly a safety measure used on selective pallet rack to prevent pallets or the products stored on them from falling through the rack structure. Wire mesh decking comes in various thicknesses and mesh dimensions. Wire mesh construction also allows for easy identification of shelf contents and prevents dirt and other debris from accumulating on the shelves because of the holes in the mesh. Most wire mesh decking has U-shaped channel supports, also known as struts, to support the load. With this waterfall decking, the wire mesh extends across the top and down the front of the beam to provide more support, and is more desirable in the marketplace. Reverse waterfall decking can provide containment of a loose product to prevent the product from falling behind the rack system. Lay-in decking rests inside the step of the beam, and wire mesh does not waterfall over the beam. Some types of decking are manufactured with solid metal instead of wire mesh. Even though the solid decking provides a greater distributed weight capacity, it is discouraged by fire inspectors because sprinkler systems cannot spray through the shelves to levels below.
  6. Footplates, also known as footpads or baseplates, are at the base of columns and serve as anchors to give the rack more stability: anchor bolts are inserted through the baseplate's holes to attach the column to the concrete floor. Footplates are made of thicker steel and in some geographic locations, they must be of a certain size and seismic rating. Footpads increase the pallet rack's overall stability and weight-bearing capacity.
  7. Shims are used when the uprights are resting on uneven floors; the shims, equal in size to the base of the uprights, are installed beneath the uprights to level the rack.
  8. Row spacers are sometimes used if uprights are arranged in back-to-back rows; the spacers are mounted between adjacent columns to ensure that the rows are kept straight and to give the pallet racks even more strength and steadiness.
  9. Wall ties may be used for further support if the uprights are arranged in a row along a cwall.
  10. Column protectors, also known as post protectors, are protective shields that can be installed around the base of an upright to minimize damage where forklifts might hit the upright. Damage to the base of a column can weaken the entire frame and could cause it to collapse. Column protectors are made of various materials such as polyethylene, ductile iron casting, and other durable materials.
  11. Guard rails are installed to increase protection for upright columns and for human safety when platforms or steps are attached to pallet racks.


References



  1. ^ "The Advantages Of Pallet Flow Racking". Southwest Material Handling, Inc.. http://www.californiapalletracking.com/the-advantages-of-pallet-flow-racking/. Retrieved 15 January 2012.